Rosco TV Paint

Rosco TV Paints provide maximum and minimum reflectance values to meet the sensitive contrast requirements for standard television and Cinematography systems.

TV White is a light Neutral grey that meets specifications for 60% reflectance, the maximum brightness for white balancing. TV Black is a rich matte black which meets specifications for 3% reflectance, the minimum brightness intended for transmission.

Finish: Matte.

Solvent: Water.

Binder Type: Vinyl Acrylic.

Dilution: Use straight out of the can. If necessary, dilute up to 10% with water.

Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.

Application: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.

Film Thickness: 2 mil. Dry Film.

VOC Content: Max 50g/L.

Coverage: Appx 28sqm per gallon.

AVG. Dry Time: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.

Clean-Up: Soap and water.

Shelf Life: Minimum 24 months.

Packaging: 1 Gallon (3.79L)

CAUTIONS: Do not apply when surface or air temperatures are below 50°F. Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.